Cutting/Grinding lubricants

For package. There are different size containers available. Please contact us for more details.

Water soluble cutting lubricant@/@Water soluble grinding lubricant@/@Oil Based Cutting Lubricant

Water soluble cutting lubricant

Products Name

Application and Feature

Dilution Factor

Appearance (full strength)

Appearance (diluted solution)

pH (full strength)
Package size
Note
Mecha GP Cut # 1000 Excellent anticorrosive lubricant for cutting graphite
10 - 30 times
Light yellow transparent Synthetic fluid
7.9
20L
|
Mecha Clean Cut AS-50T General cutting
5 - 30 times
colourless and clear Synthetic fluid
8.9
Mecha Clean Cut AS-50R Heavy cutting, For aluminium Light yellow transparent Synthetic fluid
9.0
Mecha Cool Cut W-HC3 General cutting, Comprise cationic compounds
5`30 times
Light yellow transparent Semi synthetic fluids
8.0
Mecha Clean Cut EM-300 Heavy cutting, For aluminium, Excellent lubrication, anticorrosion and antibacterial properties. Low tackiness
10`30 times
Brown transparent Soluble oil fluid

9.4

Mecha Clean Cut EM-MAX For heavy cutting, Aluminum, Stainless steel. Outstanding anti-decay ability and formability

20`30 times

Light yellowish brown slightly cloudy liquid Soluble oil fluid
9.4

PageTop

Water soluble grinding lubricant

Products Name

Application and Feature

Dilution Factor

Appearance (full strength)

Appearance (diluted solution)

pH (full strength)

Package size

Note
Mecha Cool Cut W-GC3 Comprise cationic compounds, Minimise material clogging 40 - 60 times Light yellow slightly turbid Semi synthetic fluids
8.3
20L
|
Mecha Cool Cut SD-7A General grinding Light yellow transparent Synthetic fluid
10.2
Mecha Cool Cut HM-3 Grinding of cemented carbide Light yellow transparent Synthetic fluid
9.1
Cera-fine W-200 Micro-fabrication of ceramics and glasses Light yellow transparent Synthetic fluid
9.2

PageTop

Oil Based Cutting Lubricant

Products Name

Application and Feature

Directions for use

Appearance

Package size

Note
Mecha Eco Tap II 100% bio based cutting
lubricant, enable to apply on any materials
Apply on the tap/drill/end mill Light yellow transparent
4L
|
Mecha Eco Tap II (A) Spray on the tap/drill/end mill
Aerosol
3
Mecha Tap Aid H For low formability materials such as stainless steel, titanium and income Add to coolant tank, flush on to the blade by circulating the reservoir. Dark green
4L, 18L
|
Mecha Tap Aid H (A) Spray on the tap/drill/end mill
Aerosol
3
Mecha Mist Cut EX 100% bio based cutting lubricant for MQL/NDM Usage varies with MQL/NDM machinery Colourless and clear
4L
|
Mecha Super Tap For tapping of stainless steel and other low formability materials
Chlorine free
Apply by blush to the blade Yellowish-brown transparent
4L
|
Mecha Super Tap (A) Spray on the blade
Aerosol
3

PageTop

Note
UN number and notice
1
UN 3264
2
UN 1268
3
UN 1950
4
May require a permit, license or other certification

Copyright (C) NIPPON MECHA-CHEMICAL Corporation. All Rights Reserved.