Products for wire EDM and Small hole EDM. Dielectric Oil

For package. There are different size containers available. Please contact us for more details.

Rust remover@/@Anticorrosive agents@/@Water soluble anticorrosive agent@/@Anticorrosive Neutraliser@/@For Small Hole EDM@/@Dielectric Oil

Rust remover

Products Name

Application and Feature

Directions for use

Appearance

pH (full strength)

Package size

Note
KC-12 Rust remover of work pieces, metal parts and products Dilute 2 to 10 times with water and immerse rusted work piece Colourless and clear Less than 1
5L,20L
1
KC-12A Rust remover of copper and brass products Colourless and clear Less than 1
Rust Remover K-200 Remove sludge/carbon from machinery and work piece Apply full strength solution on the rusty surface with using a blush or a rag Green transparent Less than 1
Mecha Sludge Cleaner EX-1 pH neutral rust and sludge remover Spray, wipe with a rag, then rinse with water Colourless and clear
7.0
500mL Triggr spray
|

PageTop

Anticorrosive agents

Products Name

Application and Feature

Directions for use

Anticorrosive term

Film thickness (µm)

Appearance

Viscosity (㎟/s)

Package size
Note
CP-3 Long term anticorrosion after removal of KC-12 by water
Moisture displacing, low viscosity, long term anticorrosion without oil stain
Immersion or spray 1 - 2 years 2 - 3 µm Light yellowish-brown
2.6
18L
2
Mecha P Coat Anticorrosion for wire-EDM work pieces
Anti-electric corrosion
Spray a thin, even layer of the agent 20-30 cm away from the surface

|

|

Green
1.0
Aerosol
3

PageTop

Water soluble anticorrosive agent

Products Name

Application and Feature

Directions for use

Additional ratio

Appearance

pH (full strength)

Package size

Note
Mecha Proof W-2K Anticorrosive additive solution for wire-EDM
Anti-electric corrosion
For submerged machining
Circulate 20 minutes or more after added to work tank reservoir About 0.2-0.5% of tank volume colourless and clear
5.1
5L,10L,18L
|
Mecha Proof W-91 Anticorrosive additive solution for wire-EDM
Anti-electric corrosion
For flushed type machining
About 0.3-0.5%
of tank volume
colourless and clear
6.2

PageTop

Anticorrosive Neutraliser

Products Name

Application and Feature

Directions for use

Appearance

pH (full strength)

Package size

Note
Metal All IH-A Anticorrosion of iron, aluminium, copper alloy, cemented carbide alloy Diluted 30 to 60 time with water, immerse in or spray Light yellow transparent
9.0
20L
|
Mecha-hibitor # 325 Anticorrosive neutraliser after removed KC-12, K-200 Diluted 20 to 50 time with water, immerse in or spray Light yellow transparent
9.7
10L, 18L
|

PageTop

For Small Hole EDM

Products Name

Application and Feature

Directions for use

Appearance

pH (full strength)

Package size

Note
Mecha ED Cool B-1 Processing fluid of small hole EDM Dilute 10 time with water Light yellowish-brown
8.4
10L, 20L
|

PageTop

Dielectric Oil

Products Name

Application and Feature

Appearance

Package size

Note
Dielectric Oil A-120 Odourless, low viscous oil Colourless and clear
18L, 200L
|

PageTop

Note
UN number and notice
1
UN 3264
2
UN 1268
3
UN 1950
4
May require a permit, license or other certification

Copyright (C) NIPPON MECHA-CHEMICAL Corporation. All Rights Reserved.