Anticorrosive agents

¦For package. There are different size containers available. Please contact us for more details.

Oil based anticorrosive agents@/@Water soluble anticorrosive agents

Oil based anticorrosive agents

Products name

Application and Feature

Directions for use

Anticorrosive term

Film thicknessiµm)

Appearance(colour)
Viscosity
(㎟/s)

Package size

Note
CP-CU Very effective anticorrosive agent and prevent discolouration for copper and copper alloys Immerse in or spray About 3 months 1 - 2 Light yellow transparent
3.6
18L
|
CP-4000LA Almost odourless and suitable for long term anticorrosion@ 1 year (indoor use) 2 - 5 Light yellowish-brown
4.2
18L
2
CP-4000 Anticorrosive agent for export purpose
Long term anticorrosion for ferrous metal
More than 1 year 2 - 5 Light yellowish-brown
2.5
18L
|
CP-3 Long term anticorrosion for ferrous metal@
Characteristic of: moisture displacing, low viscosity, oil stain prevention
More then 1 year 2 - 3 Light yellow transparent
2.6
18L, 200L
2
CP-3N (A) Anticorrosion of precision machinery and work pieces@ Spray on metal surface from 20 - 25 cm away More then 1 year 2 - 3 light yellow transparent
2.4
Aerosol
3
CP-100H Long term anticorrosion of cast iron and ferrous metal@ Immerse in or spray More than 1 year 4 - 8 Light yellowish-brown
1.9
18L
2
Mecha oil # 300H Middle term anticorrosion of iron, steel and cast iron@ More than half a year 2 - 3 Light yellowish-brown
2.9
18L
2
Drymould R-3 Quick dry anticorrosive agent, which generate ultra thin film over metal surface.@
Anticorrosion of plastic injection mold
Immerse More than 10 months About 2 Light yellow transparent
1.0
18L
2
Drymould R-3 (A) Spray
Aerosol
3
Drymould F-3 Plastic injection mold (wear resistant, lubrication, anticorrosion)
Lubricate wear surface, wear proof anticorrosive agent
Immerse
Do not apply directly on plastic and painted surface
|
1 - 2 Light yellow with slightly turbid
2.5
18L
2
Drymould F-3 (A) Spray
Do not apply directly on plastic and painted surface
Aerosol
3
Mecha Fine Coat M-1 (A) Anticorrosive ultra thin film coating agent@
Enable to use on any electric products and metals
Spray on treating surface from 20 - 25 cm away More than 1 year About 1 colourless and clear
0.87
Aerosol
3
Mecha Fine Coat M-2 (A) Anticorrosive ultra thin film coating agent
Enable to use on electric products and any metals
Possible to remove by MECHA FINE MATE@
More than half a year About 1 Light yellow transparent
0.81
Aerosol
3

£PageTop

Water soluble anticorrosive agents

Products name

Application and Feature

Directions for use

Anticorrosive term

Appearance(colour)
pH (full strength)

Package size

Note
Mecha-hibitor #60 Superior water soluble anticorrosive agent Dilute with water 5-20 times, then immerse in or spray 30 days Brown
10.4
5, 18L
|
Mecha-hibitor # 31 Temporal anticorrosion of iron, steel and cast iron between machining operations Dilute with water 20 - 50 times, then immerse in or spray work piece 15 - 20 days Light yellow transparent
|
18L
|
Mecha-hibitor # 25 Temporal anticorrosion of iron between machining operations Dilute with water 20 - 100 times, then immerse in or spray work piece   colourless and clear
11.4
20L
|
Mecha-hibitor # 30 Temporal anticorrosion of iron and cast iron between machining operations@ Dilute with water 20 - 50 times, then immerse in or spray work piece   Light yellow transparent
9.3
18L
|
Mecha-hibitor # 325 Anticorrosive neutraliser after washed KC-12 with water
Temporal anticorrosion of iron
  Light yellow transparent
9.7
18L
|
Metal All IH-A Temporal anticorrosion of many kinds of metals such as, iron, aluminium, copper alloys and cemented carbide Dilute with water 20 - 60 time, then immerse in or spray work piece   Light yellow transparent
9.0
20L
|

£PageTop

Note
UN number and notice
1
UN 3264
2
UN 1268
3
UN 1950
4
May require a permit, license or other certification

Copyright (C) NIPPON MECHA-CHEMICAL Corporation. All Rights Reserved.