TOP > Cutting/Grinding lubricants > Cutting/Grinding lubricants

Mecha GP Cut # 1000

Charactoristic

Excellent anticorrosive lubricant for cutting graphite.
Low tackiness and remain the machine clean and improve working environment.
Prolong life of high cost graphite working equipments.
Diatomaceous earth of diatomite filter prevent adhesion of Mecha GP Cut #1000 compounds and extend life of both filter and agent.
Excellent tramp oil separation properties.
Non flammable
Excellent foam control without silica compounds.

Cutting lubricant with antibacterial and antifungal properties.

Contain no harmful compounds such as sodium nitrite, cyanide and nitrosamine, therefore safe to people.
yUsagez
General cutting operation of graphite and iron
yDirectionz
Dilute 10 - 30 times with water

Mecha Clean Cut AS-50T

Charactoristic

Suitable for cutting die/mould materials
Oil and chlorine free
Excellent tramp oil separation properties.
Excellent foam control under high pressure without silica compounds.
Cutting lubricant with antibacterial and antifungal properties.

yUsagez
General cutting of die/mould materials

yDirection for use and Dilution factorz
Add full strength agent to water when diluted.

šConcentration control is needed as the concentration of solution changes all the time

Mecha Clean Cut AS-50R

“Á’·

AS-50R has improved cutting properties of AS-50T.
Maintain the advantages of AS-50T and correspond to heavy cutting

yUsagez
Please refer to "AS-50T".

Add full strength agent to water when diluted.

Mecha Clean Cut EM-300

“Á’·

Excellent lubrication and cooling properties, enable to increase speed of the process.
Decrease inferiorities due to the heat production and dramatically prolong life of the machine.
Effective lubrication, this agent can be used for any materials including aluminium and other low formability materials
Chlorine free
yUsagez
General cutting
yDirection for usez
Add full strength agent to water when diluted.
Standard dilution factors are following.

CNC/NC milling machine, general milling machine

10 - 30 times
Tap, reamer
10 - 20 times

Mecha Clean Cut EM-MAX

“Á’·

EM-MAX has superior formability for Aluminium and Stainless steel heavy cutting. It is able to dilute up to 30 times for general cutting operation.
Prolong the duration of cutting tools by excellent cooling properties.
Our original anti-decay mechanism makes it possible to prolong usage of cutting lubricant.
Chlorine free

yUsagez
General cutting

yDirection for usez
Add full strength agent to water. Standard dilution factor: 20~30 times

Mecha Cool Cut W-HC3


Excellent lubrication and cooling properties and enable to increase speed of the process.
Decrease inferiorities due to the heat production and dramatically prolong life of the equipments.
Chlorine free

yUsagez
General cutting

yDirection for usez
Add full strength agent to water when diluted.
Standard dilution factors are following;
NC, CNC, turret, boring lathe 20 - 30 times
Band saw machine 20 - 50 times

Mecha Cool Cut W-GC3

Cationic grinding lubricant, performed well on processed diamond
Excellent lubrication and cooling properties, enable to increase speed of the process.
Decrease inferiorities due to the heat production and dramatically prolong life of the machine.
Chlorine free.

yUsagez
Various grinding operation (cylindrical, inside diameter, surface and centre less grinding)


Mecha Cool Cut SD-7A

Excellent lubrication and cooling properties, enable to increase speed of the process.
Maintain transparency and no interference to operation.
Decrease inferiorities due to heat production and dramatically prolong life of the machine.
Chlorine free
Effective anticorrosive properties.
Excellent foam control with antibacterial and antifungal properties.

yUsagez
Various grinding operation (cylindrical, inside diameter, surface, centre less and rotary table grinder)

Mecha Cool Cut HM-3

Suitable grinding lubricant for cemented carbide and ceramics
High anticorrosive properties and enable to apply on ferrous and non-ferrous metal.
Remain transparency after addition
Chlorine free
Excellent foam control without silicic compounds.
Grinding lubricant with antibacterial and antifungal properties.

yUsagez
Grinding of cemented carbide, ceramic and non-ferrous metal

 

Cera-fine W-200

Excellent sedimentation properties of abrasive powder and sludge.
Can be apply on cemented carbide, ferrous and non-ferrous metal.
Composed with harmless compounds to both people and environment.
Excellent foam control without silicic compounds.
The lubricant with antibacterial and antifungal properties.

yUsagez
Grinding and micro-fabrication of ceramic.
Grinding of cemented carbide, ferrous and non-ferrous metal.

 

Mecha Eco Tap II

100% bio based and harmless to both people and environment.
Contain no extreme pressure additives such as chlorine, sulphur, phosphor and molybdenum, therefore reduce odour production during the operation.
Excellent lubrication, prolong life of the cutting blade.
High anticorrosive properties and enable to apply on ferrous and non-ferrous metal.
Less affect on resin and rubber.

yUsagez
Suitable application
Various cutting operation such as drill, tap, thread chaser, reamer, turret lathe, boring lathe, and milling. 
Suitable materials
Carbon steel, low formability material, non-ferrous metal

Mecha Mist Cut EX

Excellent lubrication, prolong life of the cutting blade
Low tackiness
Effective anticorrosive properties and enable to apply on ferrous metal and also for non-ferrous metals.
100% bio based

yUsagez
MQL/NDM
Various cutting operation such as drill, tap, thread chaser, reamer, boring lathe, milling and gear cutting

 

Mecha Super Tap

“Á’·
High lubrication properties, suitable for low formability material (eg. tapping of stainless steel).
Effective anticorrosive properties and easily degreased
Chlorine free, no odour, environmentally friendly
yUsagez
Suitable application
 
Various cutting operation such as drill, tap, thread chaser, reamer, boring lathe, milling and gear cutting.
Suitable material
 
Carbon steel, low formability material, non-ferrous metal

 

back

Copyright (C) NIPPON MECHA-CHEMICAL Corporation. All Rights Reserved.