TOP > Rust remover, Pickling agent > Rust remover, Pickling agent

KC-12

@
Safe, No irritation, Odourless rust remover for wire EDM work pieces

Characteristic
Composed with harmless compounds, produce no poisonous gas or irritation and prevent surrounding machinery from rusting
Prevent metals from discolouration
Quick rust removal (1- 10 minutes) without damage metal surfaces
Can be used full strength or dilute with water (1 - 10 times), non flammable, non explosive
yUsagez
Pre-treatment of plating and painting Pickling of stainless steel


yInstructionsz

Rust Remover K-200

Characteristic
Remove sludge and carbon deposit on wire-EDM with just one wipe!
Strong rust remover, unnecessary of washing after pickling just wipe with a rag
Composed with harmless compounds, produce no poisonous gas or irritation and prevent surrounding machinery from rusting
After the procedure prevent metal surface from acidic corrosion and rust recursion
Some of low corrosive resistance materials (non ferrous metal and cemented carbide) may affected by the agent. In this case, please rinse with water or neutralise with water soluble anticorrosive agent. Please refer Material Safety Data Sheet for more details.

Mecha Sludge Cleaner EX-1

Characteristic
Sludge removal for wire-EDM and parts
Clean without removing the Wire Guide
Clean dielectric plates, water nozzles, set tables, work tank walls and jigs. Because it is pH neutral, it doesnft damage resin and rubber inside the machine.
Clean the work piece initial holes. (prevent wire breakage)
Rust removal for work pieces. For machine maintenance. For car and motorcycle maintenance, etc.

back

Copyright (C) NIPPON MECHA-CHEMICAL Corporation. All Rights Reserved.